crux (289)

Crux SWRTY-61C Radio Replacement with Steering Wheel Control Retention for Select Toyota Vehicles 2018-Up    The CRUX SWRTY-61C is a radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable the retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera, auxiliary audio input, and USB retention cable and is also pre-programmed to retain steering wheel controls. General Features: Retains factory features in select Toyota vehicles while functioning with an aftermarket radio. – Pre-programmed to retain factory Steering Wheel Controls. – Retains factory back-up camera. – Retains factory Auxiliary Audio Input. – Includes factory USB retention adapter cable. – Includes antenna adapter. Note: This unit Does Not retain a factory JBL amplifier if your vehicle is equipped with a factory JBL amplifier please select SWRTY-61P Compatibility: Toyota2020-Up 4Runner2019-Up Avalon2018-Up Camry2019-Up CH-R2018-Up Corolla2020-Up Highlander2016-Up RAV42020-Up Sequoia2018-Up Sienna2020-Up Tacoma2020-Up Tundra ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Crux SWRTY-61J Radio Replacement w/ SWC & JBL Amp Retention for Toyota/Lexus Vehicles 2003-Up The CRUX SWRTY-61J is a radio replacement interface for select Lexus and Toyota vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. It retains factory-installed JBL Amplifiers and is also pre-programmed for the retention of steering wheel controls General Features:  Retains factory features in select Lexus and Toyota vehicles with JBL Harman-Becker Digital-Synthesis Amplifier, including JBL (Pioneer-made) amplifiers while functioning with an aftermarket radio.Pre-programmed to retain factory Steering Wheel Controls.iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine, and JVC radios.Variable audio gain adjustment to level match the aftermarket radio and factory amplifier.Retains OEM 3.5mm Auxiliary Audio Input.Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.Supports Pick/End Calls, Pick up and Toggle between 1st and 2nd incoming calls, AVRCP Track, and Seek.EIA color-coded wiring for easy installation.Retains Factory Backup Camera with included RVC retention harnessNotes:This unit retains a factory JBL amplifier if your vehicle is not equipped with a factory JBL amplifier please select SWRTY-61S Compatibility: LEXUS 2004 – 2006 ES300 2003 – 2005 IS300 2006 LS430 RETAINS FACTORY JBL AMPLIFIER ONLY Note: Do not retain Mark Levinson, Pioneer, Nakamichi, or Harmon Kardon amplifiers. TOYOTA 2003 – 2019 4Runner 2005 – 2018 Avalon 2007 – 2017 Camry 2004 – 2008 Camry Solara 2009 – 2017 Corolla 2011 – 2014 FJ Cruiser 2008 – 2018 Highlander 2005 – 2012 Matrix 2004 – 2017 Prius 2004 – 2018 RAV4 2005 – 2018 Sequoia 2004 – 2016 Sienna 2005 – 2019 Tacoma 2004 – 2019 Tundra 2009 – 2015 Venza 2008 – 2011 Yaris ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.  

Crux SWRTY-61N Radio Replacement w/ SWC & OE RVC Retention for Toyota Vehicles 2012-Up The CRUX SWRTY-61N is a radio replacement interface for select Toyota vehicles.It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera and is also pre-programmed for retention of steering wheel controls. General Features:  Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.Pre-programmed to retain factory Steering Wheel Controls.iPhone Voice Recognition (VR) feature from SWC on select radios.Retains OEM Rear View Camera.Retains factory USB and auxiliary audio input (aftermarket radio must have these features).Includes factory USB retention adapter cable.Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.EIA color coded wiring for easy installation Compatibility: SCION 2016                iM2012 – 2013   iQ TOYOTA 2013 – 2019   4Runner2012 – 2018   Avalon2012 – 2017   Camry2012 – 2019   Corolla2013 – 2019   Highlander*2009 – 2013               Matrix2012 – 2020   Prius2012 – 2018   RAV42012 – 2019   Sequoia** 2015 – 2017 Sienna2013 – 2019   Tacoma2013 – 2019   Tundra**2012 – 2016   Venza Notes: * 2013-2018 Highlander vehicles without OEM Navigation radio will NOT retain the factory back up camera. ** See Special Note on page 2 of manual.   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRTY-61P Radio Replacement with Steering Wheel Control and Amplifier Retention for Select Toyota Vehicles 2018-Up The CRUX SWRTY-61P is a radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera, auxiliary audio input, usb retention cable, the factory amplifier and is also pre-programmed for retention of steering wheel controls. General Features:  Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.– Pre-programmed to retain factory Steering Wheel Controls.– Retains factory JBL amplifier.– Retains factory back-up camera and sensors.– Retains factory bird’s eye view feature (if equipped).– Retains factory Auxiliary Audio Input.– Includes factory USB retention adapter cable.– Includes antenna adapter.Note:This unit retains factory JBL amplifer if your vehicle is not equipped with factory JBL amplifier please select SWRTY-61C Compatibility: TOYOTA2020-Up 4Runner2019-Up Avalon2018-Up Camry2019-Up CH-R2018-Up Corolla2020-Up Highlander2019-Up RAV42020-Up Sequoia2018-Up Sienna2020-Up Tacoma2020-Up TundraNOTE: For JBL amplified vehicles ONLY ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRTY-61S Radio Replacement w/ SWC Retention for Select Toyota Vehicles 2003-2014 The CRUX SWRTY-61S is a radio replacement interface for select Toyota vehicles. It facilitates the integration of an after-market radio to enable the retention of certain factory features when replacing a factory-installed radio and is also pre-programmed for the retention of steering wheel controls. General Features:  Retains factory features in select Toyota vehicles while functioning with an aftermarket radio. Pre-programmed to retain factory Steering Wheel Controls. iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine, and JVC radios. Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models. Supports Pick/End Calls, Pick up and Toggle between 1st and 2nd incoming calls, AVRCP Track, and Seek. Retains factory AUX Input. EIA color-coded wiring for easy installation. Note:This unit Does Not retain a factory JBL amplifier if your vehicle is equipped with a factory JBL amplifier please select SWRTY-61J Compatibility: TOYOTA 2003 – 2013 4Runner 2005 – 2011 Avalon 2007 – 2011 Camry 2004 – 2008 Camry Solara 2007 – 2010 FJ Cruiser 2008 – 2012 Highlander 2005 – 2011 Matrix 2006 – 2011 RAV4 2003 – 2011 Sequoia 2004 – 2014 Sienna 2004 – 2008 Solara 2005 – 2012 Tacoma 2003 – 2013 Tundra (2013 early production) 2009 – 2011 Venza 2008 – 2011 Yaris SCION 2005 – 2011 tC 2004 – 2007 xA 2004 – 2011 xB 2008 – 2011 xD ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Crux SWRVL-54 Radio Replacement w/ SWC Retention for Volvo Vehicles Retains factory features in select Volvo vehicles while functioning with an aftermarket radio Retains Steering Wheel Controls via built-in, pre-programmed interface With navigation outputs (Reverse gear , Illumination and Speed signal) Provides Accessory Power ( 2A MAX ) For use with Non-amplified and Standard amplified system General Features:  Retains factory features in all CAN bus based Volvo modelsRetains Steering Wheel Controls via built-in, pre-programmed interfaceSupports Amplified and Non-Amplified SystemsEIA Color Coded Wiring for easy Installation Compatibility:VOLVO2001 – 2004 S401999 – 2009 S601999 – 2005 S802001 – 2004 V402001 – 2007 V70*2001 – 2007 XC70*2002 – 2012 XC90*/** Vehicle-Specific Notes*Compatible with CAN based vehicles only (2nd Generation / Type P26).** NOT Compatible with LIN bus and Fiber-optic systems. Please verify prior to installation. ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRVW-52 Radio Replacement w/ SWC Retention for Volkswagen Vehicles The CRUX SWRVW-52 is a premium radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features with Amplified and Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls. General Features:  Retains factory features in all CAN bus based Volkswagen modelsRetains factory-installed amplified systems, including Touareg (2004-2007) and Fender amplified systemsRetains Steering Wheel Controls via built-in, pre-programmed interfaceWith navigation outputs (Reverse gear , Illumination and Speed signal)Provides Accessory Power ( 2A MAX )   Compatibility: VOLKSWAGEN2012-2014 Beetle2009-2014 CC2006-2012 Eos2002-2014 Golf2006-2014 GTI2002-2014 Jetta2002-2014 Passat2006-2011 Rabbit2009-2014 Tiguan2004-2010 Touareg MASERATI2004-up Quattroporte ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux SWRVW52B Radio Replacement w/ SWC Retention for Select Volkswagen Vehicles The CRUX SWRVW-52B is a premium radio replacement interface for select Volkswagen vehicles. It facilitates the integration of an after-market radio to retain factory features for Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls. This unit includes an SWRVW-52B module, quadlock harness, & SWC cables General Features:  Retains factory features in select Volkswagen vehicles while functioning with an aftermarket radioRetains Steering Wheel Controls via built-in, pre-programmed interfaceRetains factory backup cameraUnit provides navigation outputs (Reverse gear, Illumination, and Speed signal) Notes:1. Driver information display will show the last information that was shown prior to removing the factory radio.2. This interface does not retain the factory Bluetooth or Sirius Satellite Radio.3. Not compatible with amplified systems. Compatibility:VOLKSWAGEN2016 – 2018 Beetle2015 – 2018 Golf / GTI2017 – 2018 Golf Alltrack2015 – 2018 Golf R2015 – 2017 Golf Sportwagen2016 – 2018 Jetta / GLI2016 – 2018 Passat2016 – 2017 Tiguan   ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Crux TDR-RVM32 Rear-View Mirror with Front and Rear Camera, DVR, and GPS Functions General Features: – 9.66” full view monitor with touch screen operation. – Wide angle HD front and rear camera. – DVR function with 32GB micro SD card included. – Loop video recording with real-time playback. – Split screen viewing of front and rear cameras. – GPS logger. – Audio recording with a built-in microphone. – Collision detection sensor automatically locks the video in the event of a collision. Compatibility: Universal ApplicationTDR-RVM32 | Rear-View Mirror with Front and Rear Camera, DVR, and GPS FunctionsRear-View Mirror with Front and Rear Camera, DVR, and GPS Functions ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Crux UC-1 Rear-view Interface for Select Dodge, Jeep & Ram Vehicles w/ Uconnect Systems 2013-2018 UC-1 Backup Camera Interface for 2013 - 2017 Dodge, Chrysler, Jeep & Ram Vehicles w/ Uconnect Systems   General Features: Backup Camera InputPlug and PlayNo Dealer programming required.Will work with Diesel vehiclesNote:will not work with heated seats or heated steering wheelWill not work with Uconnect radio’s that come with factory Carplay/ Android Auto  Compatibility: Chrysler2015 – 2017 200DODGE2015 – 2017 Charger2015 – 2017 Challenger2014 – 2017 DurangoJEEP2014 – 2017 Grand CherokeeRAM2013 – 2017 15002013 – 2017 25002013 – 2017 3500 NOTES:Not compatible with Ram vehicles that are equipped with a factory-installed cargo camera.Compatible with diesel vehiclesNote will not work with heated seats or heated steering wheel controls RADIO COMPATIBILITY Uconnect 8.4” Screen with 52-Pin connectorUconnect 5” Screen 6-button/2-knob with 52-Pin connectorUconnect 4.3” Screen 6-button/2-knob with 52-Pin connector ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux UC-2 Rear-view Interface for Select Chrysler and Dodge Vehicles w/ Uconnect Systems 2011-2017  General Features: Rear View Integration Module and Harness• For Select 2011 - 2017 Chrysler and Dodge Vehicles• Will not work with heated seats or heated steering wheel controls  Compatibility: CHRYSLER2011 – 2014 300DODGE2011 – 2014 Charger2011 – 2017 JourneyRADIO COMPATIBILITYRB5/RE2 Uconnect 8.4″ Screen / 2-piece radio with 22-pin connector ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·

Crux USB-3.5 Universal USB to 3.5mm Auxiliary Audio Input Adaptor Item highlights     Universal USB to 3.5mm Auxiliary Audio Input Adaptor Color: Black       ⚠️Warning: Cancer and Reproductive Harm-www.P65Warnings.ca.gov·