Rockford Fosgate (329)

Rockford Fosgate R169X3 6x9" 260-Watt 3 Way Car Speakers The Rockford Fosgate R169X3 is a 6”x9” 3-way full-range speaker rated at 65 watts (130W per 4 pack) RMS for a new generation of factory replacement speakers. Kit includes integrated high pass crossovers and mounting hardware. The 6"x9" Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature polypropylene cones and a silk dome pole mounted Piezo tweeter and midrange. Includes grilles so they look as good as they sound. General Features: R169X3 New Rockford Fosgate R169X3 6x9" 260-Watt 3 Way Car Speakers (2 Pairs) 130 Watt Max (260 Watt per 4 Speakers) 65 Watt RMS (130 Watt per 4 Speakers) Vacuum Polypropylene cone Rubber surround Stamped steel basket Silk dome flush mounted tweeter Integrated tweeter crossover Impedance: 4 Ohm Sensitivity: 90dB Frequency Response: 47Hz 20kHz Crossover: Tweeter High Pass (HP): 6dB Klippel Verified Klippel is a speaker certification program allowing us to deliver the best possible speakers. ICC Crossover the Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look CEA 2031 Compliant Grills Included Product Condition: Brand New Part Number: R169X3 1 Year Manufacturer Warranty What's in the box:Rockford Fosgate R169X3 owner's manual Two 3-Way speakers 2 Grilles Two 15' Lengths of speaker wire (each has female quick-slides on one end and tinned bare wire on the other) Eight 1-1/4" Screws 8 Speed clips ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual

Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond-cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty Weight: 10 Ibs What is in the P2D4-8  package: One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual P2D4-8 owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

 2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 0.65ft³ Recommended Sealed Enclosure: 0.23ft³ Matching Amplifiers: (one subwoofer) Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate Punch P2D4-8 500W Max (250W RMS) 8" Punch P2 Series Dual 4-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch," and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 4 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D4-8 package: P2D4-8 owner's manual One 8" Dual 4-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws 4mm Allen head bit Installation/Operation manual

Rockford Fosgate Punch P2D2-8 500W Max (250W RMS) 8" Punch P2 Series Dual 2-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch" and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber-reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes a diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for a larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue-resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating reinforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 0.65ft³ Recommended Sealed Enclosure: 0.23ft³ Matching Amplifiers: (one subwoofer) Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the P2D2-8 package: P2D2-8 owner's manual One 8" Dual 2-ohm voice coil subwoofer Trim ring Eight 1-1/8" Allen head screws Installation/Operation manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Rockford Fosgate Punch P2D2-8 500W Max (250W RMS) 8" Punch P2 Series Dual 2-Ohm Car Subwoofer Rockford Fosgate has always delivered the "punch" and the dual-voice-coil P2 8-inch subwoofer is no exception. Kevlar fiber reinforced paper cones kick out the bass impact you can feel, along with Rockford's "VAST" technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring, and an optional grille insert is also available. General Features: 8" Dual 2 ohm Punch Stage 2 Subwoofer Power Handling: Peak: 500 watts Power Handling: RMS: 250 watts Recommended power range: 125 - 300 watts RMS CEA-2031 Compliant Klippel Verified Flex-fit Mounting pattern Proprietary spider venting/cooling technique StampCast basket with integrated spider venting Sturdy 16 gauge compound bend frame geometry High modulus Kevlar re-inforced paper-pulp cone Semi-flexible, PVC removable protective motor cover Multi-point high-temp/high-strength neck joint bonding technique Tall-profile VAST Santoprene surround for larger surface area Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads Fatigue resistant and reduced strain "stitched on" flexible lead wire design Proprietary all metal, radially oriented compression input terminal assembly Optimized motor magnetics with extended pole and bumped vented backplate High temp 2.25" voice coil w/ spun-laced Nomex insulating re-inforcement collar Die-Cast aluminum soft-touch painted trim ring allows for optional integrated grill Rockford Fosgate P2 Series Mounting Depth: 4.76" Cutout Diameter: 7.13" Magnet Weight: 49 oz Frequency Response: 43 - 250 Hz Xmax: 7.7mm Sensitivity: 83 dB @ 1 watt / 1 meter Recommended Ported Enclosure: 0.65ft³ Recommended Sealed Enclosure: 0.23ft³ Matching Amplifiers: (one subwoofer) Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca

Rockford Fosgate Punch Package w Amplifier & 6x8" Speakers 2 Pair P1683 6" x 8" 3Way Coaxial Car Speakers + P400X4 4Channel Class AB Full Range Amplifier 2 Rockford Fosgate Punch P1683 260W Peak (130W RMS) 6" x 8" Punch Series 3-way Full Range Coaxial Speakers (2 Pair) Fans needing a great-sounding speaker to replace factory-installed garbage will benefit from this Punch series full-range speaker. The P1683 offers a Flex Fit™ basket to ensure compatibility with odd-shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. The P1683 is a 6”x8” 3-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers, integrated high-pass crossovers, and mounting hardware. General Features 6" x 8" Punch Series 3-way Full Range Speakers Power Handling: Peak: 260 watts per pair / 130 watts each RMS: 130 watts per pair / 65 watts each Recommended power range: 10 - 70 watts RMS per channel Injection-molded mineral-filled polypropylene cone Butyl rubber surround 0.75" PEI Dome tweeter Flexfit basket design OEM Adapter plate included Recessed tweeter mount uses standard 1-3/4" hole CEA-2031 compliant speaker Top-mount Depth: 2.28" 4 ohms impedance Frequency Response: 65 - 24,000 Hz Sensitivity: 90dB Authorized Internet Dealer 1-year Manufacturer's Warranty Rockford Fosgate Punch P400X4 400W Punch Series 4-Channel Stereo Class AB Car Power Amplifier (P400X.4) The P400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the P400X4 is an excellent amplifier choice for virtually any vehicle. The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-ohms. It is perfect for a 4-way full-range system or a 3-way system with a front stage and subwoofers on the rear channels.The stealth top-mounted control panel not only gives the amp a sleek finished look but also protects the vital controls.Our custom heat sink design uses high aluminum mass where needed most to maximize heat transfer from the output MOSFETS to the surrounding air, keeping the circuitry cool even under high power and output demand. General Features: Rockford Fosgate Punch Series P400X4 Class-AB FullRange 2-Ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 50 watts x 4 channel 2 ohms: 100 watts x 4 channel Bridged, 4 ohms: 200 watts x 2 channel CEA-2006 Compliant Amplifier Features C.L.E.A.N. Set-up with 10-step set-up procedure w/ input/output clip detection and indicator LEDs Pulse Width Modulated MOSFET power supply LED power (blue) and protect (red) indicators Stealth top-mounted control panel Soft start turn-on 4, 3, or 2 channel operation Nickel-plated RCA level inputs Nickel-plated captive C-clamp terminals High-level input capable of Auto Turn-On circuit (RFIF2SW required, sold separately. Up to TWO adapters are needed for this amplifier.) 3-way protection circuitry (thermal, overload, and speaker short protection) On-board differential inputs eliminate noise picked up by the signal cable Integrated Trans•ana technology simplifies the amplifier's signal path, allowing the signal to travel through the amplifier at a lower voltage. The result is excellent reliability and exceptional sound quality MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span DSM (Discrete Surface Mounted Components) utilizes 1% tight-tolerances, improving the efficiency of the circuit and lowering the operating temperature and potential for noise, similar to circuit boards designed by aerospace manufacturers Built-in NOMAD is a "real-time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across the entire amplifier heatsink to efficiently keep the amplifier temperatures low Input sensitivity: 150mV - 12V Frequency Response: 20 - 20,000 Hz Total Harmonic Distortion (THD): <1.0% Signal to Noise Ratio: 105dB Selectable crossover modes: LP / AP / HP Variable crossover filter: 50 - 250 Hz, 12 dB/octave Variable Bass Boost, Punch EQ: 0 to +14 dB bass boost at 12.5 kHz Variable Bass Boost, Punch EQ: 0 to +18 dB bass boost at 45Hz Fuse Rating: 60 A x 1 inline fuse recommended, not included 8 - 18 gauge speaker wire connections Installation requires 4- 8 gauge power and ground wiring. Click here for our contact information. We offer a discount on select amplifier kits from our website when purchased together with this amplifier. 8 Gauge is perfect for a full 4-ohm setup, while 4 Gauge is recommended for a full 2-ohm setup Dimensions: 11.03"W x 7.76"L x 2.38"H Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the box: 4-Channel amplifier Four 1-1/2" Self-tapping screws 2.5mm Allen wrench Quick setup instructions Certificate of Performance Rockford Fosgate Punch P400X4 owner's manual Warning:This product can expose you to chemicals known to the State of California to cause cancer. For more information, go to P65Warnings.ca.  

2 Rockford Fosgate Punch P1683 260W Peak (130W RMS) 6" x 8" Punch Series 3-way Full Range Coaxial Speakers (2 Pair) Fanatics that need a great sounding speaker to replace factory-installed garbage will certainly benefit from this Punch series full-range speaker. The P1683 offers a Flex Fit™ basket to ensure compatibility with odd-shaped factory speaker locations and an ICC (Integrated Concealed Crossover), eliminating the need to mount any black boxes. The P1683 is a 6”x8” 3-way full-range speaker rated at 65 watts RMS designed for fanatics needing a quality factory replacement driver. Includes two speakers, integrated high-pass crossovers, and mounting hardware. General Features 6" x 8" Punch Series 3-way Full Range Speakers Power Handling: Peak: 260 watts per pair / 130 watts each RMS: 130 watts per pair / 65 watts each Recommended power range: 10 - 70 watts RMS per channel Injection-molded mineral-filled polypropylene cone Butyl rubber surround 0.75" PEI Dome tweeter Flexfit basket design OEM Adapter plate included Recessed tweeter mount uses standard 1-3/4" hole CEA-2031 compliant speaker Top-mount Depth: 2.28" 4 ohms impedance Frequency Response: 65 - 24,000 Hz Sensitivity: 90dB Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca