All Car Amplifiers (452)

Diamond Audio MICRO4V2 Micro Series 600W 4-Channel Class-D Car Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 4-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design has the juice to power your system and will save you a ton of space in your car or transport whatever you need. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact, high-density aluminum alloy chassis provides superior thermal stability. Four-layer, glass epoxy circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2 CH / 4 CH) Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4 RMS Power (4Ω): 80W x 4 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: 40Hz - 400Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: 40A Dimensions: 9.07” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio HXM800.4D 4-Channel 800W RMS Class D Full-Range HXM Series Amplifier The Diamond Audio HXM800.4D is a marine-grade motorsport amplifier that boasts 800 watts RMS on a single channel. Perfect for your system that needs to push a subwoofer to the max while using minimal space. General Features: High-Density Aluminum Alloy Heat Sink with Backlit Logo Full Range Class D (IR) Chipset Four Layers PCB Design for Reduced Footprint Size Switchable 12dB HP/FLAT/LP Crossovers Integrated Soft Clip Light for Quick System Set-up BTR Port for Optional Bluetooth Receiver Control Total Power: 800W Power at 4-Ohm: 120W x 4-Ch Power at 2-Ohm: 200W x 4-Ch THD: 0.3% Frequency Response: 10Hz ~ 35kHz (-3dB) Signal-to-Noise Ratio: > -90dB Overall Efficiency: > 80% Input Sensitivity: 0.2 ~ 10.0V Dimensions: 9.35" x 5.27" x 1.75" ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

 Diamond Audio MICRO5V2 5-Channel 950W RMS Class D Car Motorcycle ATV Audio Amplifier Elite sound quality and superior power in an ultra-compact chassis. The Diamond Audio Micro4v2 5-channel power amplifier sets the standard for high-end Harley-specific amplifiers. Featuring ultra-efficient full-range class D topology and ICAD circuit that provides superior overload protection, these compact amplifiers deliver huge power for their size. Its compact design not only has the juice to power your system but will also save you a ton of space in your car or transport whatever you need it. The sound quality in a small footprint chassis can be found with Diamond Audio’s Micro series amplifiers. Featuring the ultra-efficient full-range Class D topology, these compact amplifiers deliver serious power making them the best in class. Installation possibilities are endless due to its size and power amplification output. Even with its small platform, performance and sound quality are never sacrificed with Micro amplifiers from Diamond Audio! General Features: Ultra-compact high-density aluminum alloy chassis provide superior thermal stability. Four-layer, a glass circuit board for enhanced performance and reliability Full Range Class D amplifier technology Bridgeable for high-power operation (CH1+CH2/CH3+CH4) Balanced differential inputs for superior noise rejection Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input Input selector switch (2CH/4CH) Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM), and DC offset (DC) Fully variable, 12dB per octave, electronic crossovers Remote level control for Mono channel (CH5) included Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller Illuminated logo Specifications: RMS Power Rating: RMS Power (2Ω): 150W x 4/350W x 1 RMS Power (4Ω): 80W x 4/200W x 1 Bridged (mono 1Ω): N/A Bridged (mono 2Ω): N/A Bridged (mono 4Ω): 300W x 2/200W x 1 Topology: Full Range Class D Power Supply: Power Supply: Full PWM Power Supply Threshold: 10.0VDC - 17.0VDC Idle Current: (0.7A) Distortion: THD 4 (1KHx @ 4Ω): 0.5% S/N Ratio (A weighted @1W): -85dBA S/N Ratio (A weighted @FP): -101.1dBA Input Sensitivity: Low Input Level: 200mV - 10.0V High Input Level: N/A Input Impedance: Low Input Level: 20KΩ High Input Level: 20KΩ Output Stage: Output Impedance: 0.018Ω Damping Factor (50Hz@4Ω): >70 Bandwidth (-3dB): 10Hz - 35Hz Crossover (-12dB/Oct): Variable High-Pass: Flat or Fixed 70Hz Variable Low-Pass: 40Hz - 400Hz Variable Sun-Sonic: N/A Fuse Ratings: ATC: 60A Dimensions: 10.65” L x 4.0” W x 1.46” H ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

  Diamond Audio HX1200.5 1400W RMS HEX-Series 5-Channel Class-D Car Amplifier Amp For exceptional studio sound quality, the balance of power and control must be mastered in reproducing accurate sound recordings. HEX series amplifiers deliver the most filtered and cleanest signal by removing unwanted static and transient noise that can affect and degrade any car audio system. HEX series amplifiers are manufactured using top-grade audiophile components to deliver unrivaled sound quality amplification. Inspired by the best technologies from professional studio sound equipment, HEX series amplifiers will surely provide the power and control to reproduce that signature Diamond Audio sound! General Features: Anodized Extruded Aluminum Heat Sink Provides Superior Thermal Performance 4-Layer PCB Board with Balanced Differential Inputs Full-Range Digital Class D IR Chipset “SNAP” Capacitors used Throughout Circuit Audiophile Grade High Tolerance Components Spring Steel FET Clips Provide Cleaner Board Design Illuminated Logo/Fully Concealed Mounting Output Clip Indicators for Precise System Set Up Fine-Tuned Fully Variable Crossover and Phase Control Top Mounted Controls for Convenient Amplifier Specifications: RMS Power Rating: RMS Power (4Ω): 100 W X 4 / 480 X 1 RMS Power (2Ω): 150 W X 4 / 800 x 1 Bridged(mono 4Ω): 480 W X 1(sub output) Bridged(mono 2Ω): 800 W X 1(sub output) Bridged(stereo 4Ω): 300 W X 2(4Ω) / 800 X 1(2Ω) Topology: Full Range Class D Power Supply: Full PWM Power Supply Threshold: 10.0VDC-170VDC Idle Current: (0.7A) THD 4(1KH@4Ω) : 0.06% S/N Ratio(A weighted@1W): -80dBA S/N Ratio(A weighted@FP): .95dBA Low Input Level: 200mV-5.0V Hight Input Level: N/A Input Impedance: Low Input Level: 20 KΩ High Input Level: N/A Output Impedance: 0.0297 Ω Damping Factor(50Hz@4Ω): >250 Bandwidth(-3dB): 10Hz-35KHz Crossover(-12/24dB/Oct) Variable High-Pass: 40Hz-400Hz(-12dB Ch1/2/3/4) Variable Low-Pass: 30Hz-300Hz(-12dB Ch 5) Variable Sub-Sonic: 10-55Hz @ 18 dB Fuse Ratings: ATC: 40A X 2 Dimensions: Length x Width x Height(Inches): 14.25" x 7.67" x 2" Length x Width x Height(mm): 362 x 195 x 51.5 ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Rockford Fosgate R2-300X4 Prime Series 300 Watts 4-Channel Class D Amplifier  Primed for performance, the R2-300X4 is a 300-watt, full-range Class-D amplifier capable of operating at 4Ω or 2Ω stereo and 4Ω bridged/mono. This amplifier is extremely efficient because of its Class-D technology, which reduces the vehicle's electrical system demand. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. supply that generates more power as voltage increases. General Features: Rockford Fosgate Prime R2-300X4 Class-D Full-Range 4-Channel Amplifier 50 watts RMS x 4 at 4 ohms 75 watts RMS x 4 at 2 ohms 150 watts RMS x 2 bridged output at 4 ohms bridged mode Total power output: 3000 watts Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Defeat able Auto Turn-On Circuit Features C.L.E.A.N. Set-up 2/4 Channel Input Selection Switch Front and Rear Variable Input Gain adjustment level Continuously Variable on-Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Full Range Class D Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers 1 Year Warranty Low level: 125mV-5V High level: 250mV-10V Frequency Response: 20 Hz - 20 kHz Hz Total Harmonic Distortion (THD): <1% Variable high-pass filter: 50 - 250 Hz, 24 dB/octave Variable low-pass filter: 50 - 250 Hz, 24 dB/octave Recommended Fuse Rating: 60A Dimensions: 1.9" x "6.8" x "10.1" Authorized Internet Dealer 1-year Manufacturer's Warranty What is in the R2-300X4 package: R2-300X4 Owner's Manual 4-Channel amplifier Two 7" Speaker input harnesses 3mm Allen Hex key Four 3/4" Screws 4 Flat washers Installation and Operation Instructions Certificate of Performance Rockford Fosgate contact information ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Alpine X-A70F 700 W RMS X-Series Class-D 4-Channel 2 ohm Stable AmplifierAlpine introduces the all-new X-Series of high-grade speakers and amplifiers. These products have been engineered and tuned to create a perfect match for extraordinarily dynamic, realistic sound reproduction, and a spatial sound impression.The all-new X-Series amplifiers set a new standard for sound quality performance and power output in a very compact design. Available in mono, four-channel, and five-channel configuration, these amps are a perfect match for the all-new X-Series speakers and subwoofers.General Features: Alpine X-Series X-A70F Class-D Full Range 2 ohm Stable 4-Channel Amplifier RMS Power Rating: 4 ohms: 120 watts x 4 Channel 2 ohms: 175 watts x 4 Channel 1 ohm: ------------N/A----------- Bridged, 4 Ohms: 350 Watts X 2 Channel Total power output: 700 watts CEA-2006 Compliant Amplifier Hi-Res Audio compatible Wired remote level control, Alpine RUX-KNOB.2, available Included plastic covers available to offer a brushed aluminum finish around the edges LED power (green) and protect (red) indicators Soft start turn-on 4/3/2 channel operation Speaker-level (high-level) inputs Preamp Outputs 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy-duty aluminum alloy heat-sink Input sensitivity High level: .4 - 10V Low level: .1 - 4V Frequency Response: 10 - 60,000 Total Harmonic Distortion (THD): .07% Signal to Noise Ratio: >106dB Variable low-pass filter: 50 - 400Hz, -24dB/octave Variable subsonic filter: 50 - 40Hz, -24dB/octave Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz Fuse Rating: 35A x 3 4 gauge power and ground wiring are recommended for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier. Dimensions: 11-3/4"W x 7-5/8"L x 2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the X-A70M package: 4-Channel amplifier Two 35A ATO fuses (installed) Terminal Cover Left Terminal Cover Right Terminal Cover Front Battery connector plug 2 Speaker connector plugs Logo Plate (self-adhesive) 4 Self-tapping screws (Length 3/4") 2mm Allen wrench 4mm Allen wrench Owner's Manual Alpine Verification Certificate Limited Warranty To Customers sheet X-A70M owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine KTP-445A Power Pack Head Unit Amplifier and Backup Camera Bundle. 4-Channel Compact Amp Increases Alpine Head Unit Power up to 150 Percent - 90 Watts x 4 Channels, fits iLX-W650 and Others Bundle Package: Alpine KTP-445A Power Pack Amp Absolute Waterproof Angle Backup Camera Alpine KTP-445A Plug and Play Head Unit Power Pack for Use w/ 2005-Up Alpine Head Units with a Black Power Harness The KTP-445A Power Pack amplifies power output on select 2005 and newer Alpine head units, resulting in up to a 150 percent power increase over the original power from the head unit's built-in amplifier. The compact size lets the KTP-445A fit where most amplifiers won’t. The KTP-445A comes equipped with direct plug-in connectors for select 2005 and newer Alpine head units and it fits behind the dash of most vehicles. It's small and compact at only 7-7/16” x 1-1/2” x 2-1/2”. Its size and flexible wires make the Power Pack an easy choice to save space. To ensure that Alpine sound quality is heard, we’ve created a platform that offers an unbelievably low noise floor, taking extra care to ensure a clean signal path, with no extraneous interference. The result: The Power Pack boasts a 1-watt signal-to-noise ratio of 82dB or better. General Features: Alpine Power Pack 4-Channel Class D for Select In-Dash Receivers Plug-and-play design for compatible Alpine head units (2005 - Up, Black 16 Pin) RMS Power Rating: 4 ohms: 45 watts x 4 Channel Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of an Alpine head unit without having to install a full-size amplifier and amp install kit The fast and easy solution to higher power aftermarket sound High-efficiency digital circuit design Gain optimized for Alpine head units Plugs directly into the wiring harness of the Alpine receiver Fast and simple installation 4-channel operation for four speakers Is not compatible with factory amplifiers Frequency response: 20-20,000 Hz Signal to Noise Ratio: 84 dBA Fuse Rating: 15A x 1 Includes both Amp-to-receiver and Amp-to-vehicle Harnesses Dimensions: 7-13/16D x 2-9/16"W x 1-1/2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the KTP-445A package: Head Unit Power Pack (15A fuse installed) 39" Amp-to-receiver harness (male 16-pin connector on each end) 31" Amp-to-vehicle harness (male 16-pin connector on one end and a female 16-pin connector on the other end) 2 Brackets 4 Screws 4 Wire-ties Installation Diagram Online Product Registration Limited Warranty Information KTP-445A Power Pack owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTP-445A Power Pack Head Unit Amplifier and Backup Camera Bundle. 4-Channel Compact Amp Increases Alpine Head Unit Power up to 150 Percent - 90 Watts x 4 Channels, fits iLX-W650 and Others Bundle Package: Alpine KTP-445A Power Pack Amp Absolute Waterproof Angle Backup Camera Alpine KTP-445A Plug and Play Head Unit Power Pack for Use w/ 2005-Up Alpine Head Units with a Black Power Harness The KTP-445A Power Pack amplifies power output on select 2005 and newer Alpine head units, resulting in up to a 150 percent power increase over the original power from the head unit's built-in amplifier. The compact size lets the KTP-445A fit where most amplifiers won’t. The KTP-445A comes equipped with direct plug-in connectors for select 2005 and newer Alpine head units and it fits behind the dash of most vehicles. It's small and compact at only 7-7/16” x 1-1/2” x 2-1/2”. Its size and flexible wires make the Power Pack an easy choice to save space. To ensure that Alpine sound quality is heard, we’ve created a platform that offers an unbelievably low noise floor, taking extra care to ensure a clean signal path, with no extraneous interference. The result: The Power Pack boasts a 1-watt signal-to-noise ratio of 82dB or better. General Features: Alpine Power Pack 4-Channel Class D for Select In-Dash Receivers Plug-and-play design for compatible Alpine head units (2005 - Up, Black 16 Pin) RMS Power Rating: 4 ohms: 45 watts x 4 Channel Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of an Alpine head unit without having to install a full-size amplifier and amp install kit The fast and easy solution to higher power aftermarket sound High-efficiency digital circuit design Gain optimized for Alpine head units Plugs directly into the wiring harness of the Alpine receiver Fast and simple installation 4 channel operation for four speakers Is not compatible with factory amplifiers Frequency response: 20-20,000 Hz Signal to Noise Ratio: 84 dBA Fuse Rating: 15A x 1 Includes both Amp-to-receiver and Amp-to-vehicle Harnesses Dimensions: 7-13/16D x 2-9/16"W x 1-1/2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the KTP-445A package: Head Unit Power Pack (15A fuse installed) 39" Amp-to-receiver harness (male 16-pin connector on each end) 31" Amp-to-vehicle harness (male 16-pin connector on one end and a female 16-pin connector on the other end) 2 Brackets 4 Screws 4 Wire-ties Installation Diagram Online Product Registration Limited Warranty Information KTP-445A Power Pack owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Alpine KTP-445A Plug and Play Head Unit Power Pack for Use w/ 2005-Up Alpine Head Units with a Black Power Harness The KTP-445A Power Pack amplifies power output on select 2005 and newer Alpine head units, resulting in up to a 150 percent power increase over the original power from the head unit's built-in amplifier. Compact size lets the KTP-445A fit where most amplifiers won’t. The KTP-445A comes equipped with direct plug-in connectors for select 2005 and newer Alpine head units and it fits behind the dash of most vehicles. It's small and compact at only 7-7/16” x 1-1/2” x 2-1/2”. Its size and flexible wires make the Power Pack an easy choice to save space. In order to ensure that Alpine sound quality is heard, we’ve created a platform that offers an unbelievably low noise floor, taking extra care to ensure a clean signal path, with no extraneous interference. The end result: The Power Pack boasts a 1 Watt Signal-to-Noise Ratio of 82dB or better. General Features: Alpine Power Pack 4-Channel Class D for Select In-Dash Receivers Plug-and-play design for compatible Alpine head units (2005 - Up, Black 16 Pin) RMS Power Rating: 4 ohms: 45 watts x 4 Channel Total RMS power output: 180 watts CEA-2006 compliant amplifier Increases the output of an Alpine head unit without having to install a full-size amplifier and amp install kit The fast and easy solution to higher power aftermarket sound High-efficiency digital circuit design Gain optimized for Alpine head units Plugs directly into the wiring harness of the Alpine receiver Fast and simple installation 4 channel operation for four speakers Is not compatible with factory amplifiers Frequency response: 20-20,000 Hz Signal to Noise Ratio: 84 dBA Fuse Rating: 15A x 1 Includes both Amp-to-receiver and Amp-to-vehicle Harnesses Dimensions: 7-13/16D x 2-9/16"W x 1-1/2"H Authorized Dealer 1-year Manufacturer's Warranty What is in the KTP-445A package: Head Unit Power Pack (15A fuse installed) 39" Amp-to-receiver harness (male 16-pin connector on each end) 31" Amp-to-vehicle harness (male 16-pin connector on one end and a female 16-pin connector on other ends) 2 Brackets 4 Screws 4 Wire-ties Installation Diagram Online Product Registration Limited Warranty Information KTP-445A Power Pack owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov