All Marine Speakers (33)

Power Acoustik MWT-80W 8″ Waterproof Marine Wake Tower Speakers (Pair) White Power Acoustik went the extra mile to make these speakers marine-grade. It was built from the ground up to be the finest possible speaker for your off-road vehicles, motorcycles, or personal watercraft. It made splash-and-spray-resistant sealed motors, cones, and sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come. General Features: 100% Waterproof Enclosure & Speakers System High-Density ABS Construction w/ UV Coating Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included Injection Speaker Cone & Tititamnm Tweeters Meets ROHS and CE Certifications 4-Ohm Speaker Impedance Peak Power Handling: 750 Watts RMS Power Handling: 375 Watts Frequency Response 30-20kHz System Efficiency 90dB(1w/1m) Dimensions 10" W x 10" H x 9.6" L Mounting Bracket Features Upper Mounting Bracket Lower Mounting Bracket Mounting Bracket Base Minimum 1.26″/32mm Size Bar Maximum 2.25″/57.15mm Size Bar Pair of 8″ Wake Tower Speakers Mounting Bracket for Ea Speaker 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-65T 6.5″ Waterproof Marine Wake Tower Speakers (Pair) Titanium Power Acoustik went the extra mile to make these speakers marine-grade. It was built from the ground up to be the finest possible speaker for your off-road vehicles, motorcycles, or personal watercraft. It made splash-and-spray-resistant sealed motors, cones, and sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come. General Features: 6.5" Wakeboard Tower Speaker Enclosure Peak Power Handling: 500 watts RMS Power Handling: 250 watts Nominal impedance: 4 Ohms Color: Titanium 100% Waterproof Enclosure and Speaker System High-Density ABS Construction w/ UV Coating Steel-reinforced Mounting Bracket fits most towers Braided Stainless Steel Safety Cable Included Stainless Steel Mounting Hardware Included Polypropylene speaker cone and Titanium Tweeter Quick Disconnect Compression Terminals Meets ROHS and CE Certifications Frequency response: 40 - 20,000 Hz Sensitivity: 90 dB Dimensions: 8.5" H x 8.5" W x 9.0" L Authorized Internet Dealer 1-year Manufacturer's Warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-65BL 6.5″ Marine Wake Tower Speakers with RGB LED Lights Power Acoustik RGB Wake Tower Speakers contain quality components and bring light into the weekend! With experience in making marine-grade compliant products, we have what you need for your Truck, Boat, UTV, ATV Toys… The MWT Series' rugged yet satin design provides consumers with trouble-free, waterproof (IP65), and excellent sound quality. Engineered for various elements, these full-range speakers are a great addition to your marine application or any Powersports lifestyle! The MWT Speakers are available in 6.5″ and 8″, with power handling ratings up to 850w MAX Power. It is also outfitted with hidden RGB LED lights, high-density injection-molded plastic, UV coating, and NEW Swivel mounting brackets. All speakers sold as pairs come with swivel clamps for the most straightforward installation. Included customizable RGB lighting & RF Remote to match your boat’s theme General Features: Built-in Hidden RGB Lighting Wireless Remote Control Included 100% Waterproof Enclosure and Speaker System 6.5″ Waterproof Marine Wake Tower Speakers Peak Power Handling: 600 watts per pair / 300 watts each RMS Power Handling: 300 watts per pair / 150 watts each Polypropylene Speaker Cone NEW Swivel Mounting System Full Function RF Remote Control LED Functions High-Density ABS Construction w/ UV Coating 100% Waterproof Enclosure & Speakers System Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included CEA-2031 compliant speakers Injection Speaker Cone Titanium Tweeters Meets ROHS and CE Certifications 4 ohms impedance Frequency Response: 40-20,000 Hz Dimensions: 8.5" W x 8.5" H x 9" D Authorized Internet Dealer 1-year Manufacturer's Warranty   ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MWT-65W 6.5″ Waterproof Marine Wake Tower Speakers (Pair) White Power Acoustik went the extra mile to make these speakers marine-grade. It was built from the ground up to be the finest possible speaker for your off-road vehicles, motorcycles, or personal watercraft. It made splash-and-spray-resistant sealed motors, cones, and sealed terminal covers. Even the grilles have a built-in drainage port to prevent standing water. It’s all engineered to maintain top-shelf performance for years to come. General Features: 100% Waterproof Enclosure & Speakers System High-Density ABS Construction w/ UV Coating Steel Reinforced Mounting Bracket System Fits Most Towers Braided Stainless Steel Safety Cable Included Injection Speaker Cone & Tititamnm Tweeters Meets ROHS and CE Certifications  Speaker Specs 4-Ohm Speaker Impedance 500w MAX Power Handling 250w RMS Power Handling Frequency Response 40-20kHz System Efficiency 90dB(1w/1m) Dimensions 8.5w x 8.5h x 9d Mounting Bracket Features Upper Mounting Bracket Lower Mounting Bracket Mounting Bracket Base Minimum 1.26″/32mm Size Bar Maximum 2.25″/57.15mm Size Bar Included In Box Pair of 6.5″ Wake Tower Speakers Mounting Bracket for Ea Speaker 1-year manufacturer warranty ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE PSS-SX01-PWR 4 6.5" Wakeboard Tower Speakers + Amplifier KTA-30FW+Bluetooth For ATV/UTV/RZR This 600-watt sound system combines the premium sound you've expected from Alpine and a unique design that will complement the look of your Side-by-Side or UTV. NEXT LEVEL SOUNDGet everything you need to take your side-by-side system to the next level with the PSS-SXS01-PWR Power Package Upgrade. This upgrade includes Alpine’s PSS-SX01 and SPV-65-SXS for the ultimate sound system upgrade. MUSIC ON YOUR ADVENTURESStream music directly from your smartphone without a radio or head unit source with the included Bluetooth® Adaptor. The module allows for quick and easy pairing to your smartphone so you can listen to your music during your drive. General Features: bundle includes a 4-channel amplifier, controller, and four 6-1/2" cage-mount speaker pods includes clamp-style bar mounts and water-resistant wiring harness fits in a variety of Polaris, Honda, Kawasaki, Can-Am, and Yamaha models marine-grade construction for weather resistance Bluetooth enabled with controller included Alpine SPV-65-SXS 6-1/2" speakers (4) grille-mounted 1" Teteron dome tweeters IP55 weather-resistance rating power handling: 90 watts RMS (225 peaks) frequency response: 50-22,000 Hz Alpine KTA-30FW C marine amplifier 4-channel Class D amp designed for off-road use 75 watts RMS per channel (150 watts peak) speaker- and preamp-level inputs high- and low-pass crossovers (variable 50-400 Hz, 12 dB per octave) IP66 weather-resistance rating matte black finish warranty: 1 year What's in the PSS-SX01-PWR package:This package contains four individually boxed items along with parts in the main box:Main Box: 2 Front logo badges 2 Rear logo badges Installation instructions Warranty information Product Registration Alpine Technical Support information KTA-30FW Amplifier: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other end) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter SPV-65-SXS Speaker Pods (x2): 2 Speaker pods w/integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on the other end) KCX-BT100 Bluetooth Adapter: Bluetooth adapter w/ 3M adhesive backing and attached 12" wires + RCA cables (inline 2A mini-ATC fuse) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE PSS-SX01-PWR 4 6.5" Wakeboard Tower Speakers + Amplifier KTA-30FW+Bluetooth For ATV/UTV/RZR This 600-watt sound system combines the premium sound you've expected from Alpine and a unique design that will complement the look of your Side-by-Side or UTV. NEXT LEVEL SOUNDGet everything you need to take your side-by-side system to the next level with the PSS-SXS01-PWR Power Package Upgrade. This upgrade includes Alpine’s PSS-SX01 and SPV-65-SXS for the ultimate sound system upgrade. MUSIC ON YOUR ADVENTURESStream music directly from your smartphone without a radio or head unit source with the included Bluetooth® Adaptor. The module allows for quick and easy pairing to your smartphone so you can listen to your music during your drive. General Features: bundle includes a 4-channel amplifier, controller, and four 6-1/2" cage-mount speaker pods includes clamp-style bar mounts and water-resistant wiring harness fits in a variety of Polaris, Honda, Kawasaki, Can-Am, and Yamaha models marine-grade construction for weather resistance Bluetooth enabled with controller included Alpine SPV-65-SXS 6-1/2" speakers (4) grille-mounted 1" Teteron dome tweeters IP55 weather-resistance rating power handling: 90 watts RMS (225 peaks) frequency response: 50-22,000 Hz Alpine KTA-30FW C marine amplifier 4-channel Class D amp designed for off-road use 75 watts RMS per channel (150 watts peak) speaker- and preamp-level inputs high- and low-pass crossovers (variable 50-400 Hz, 12 dB per octave) IP66 weather-resistance rating matte black finish warranty: 1 year What's in the PSS-SX01-PWR package:This package contains four individually boxed items along with parts in the main box:Main Box: 2 Front logo badges 2 Rear logo badges Installation instructions Warranty information Product Registration Alpine Technical Support information KTA-30FW Amplifier: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other end) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter SPV-65-SXS Speaker Pods (x2): 2 Speaker pods w/integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on the other end) KCX-BT100 Bluetooth Adapter: Bluetooth adapter w/ 3M adhesive backing and attached 12" wires + RCA cables (inline 2A mini-ATC fuse) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE PSS-SX01-PWR 4 6.5" Wakeboard Tower Speakers + Amplifier KTA-30FW+Bluetooth For ATV/UTV/RZR This 600-watt sound system combines the premium sound you've expected from Alpine and a unique design that will complement the look of your Side-by-Side or UTV. NEXT LEVEL SOUNDGet everything you need to take your side-by-side system to the next level with the PSS-SXS01-PWR Power Package Upgrade. This upgrade includes Alpine’s PSS-SX01 and SPV-65-SXS for the ultimate sound system upgrade. MUSIC ON YOUR ADVENTURESStream music directly from your smartphone without a radio or head unit source with the included Bluetooth® Adaptor. The module allows for quick and easy pairing to your smartphone so you can listen to your music during your drive. General Features: bundle includes a 4-channel amplifier, controller, and four 6-1/2" cage-mount speaker pods includes clamp-style bar mounts and water-resistant wiring harness fits in a variety of Polaris, Honda, Kawasaki, Can-Am, and Yamaha models marine-grade construction for weather resistance Bluetooth enabled with controller included Alpine SPV-65-SXS 6-1/2" speakers (4) grille-mounted 1" Teteron dome tweeters IP55 weather-resistance rating power handling: 90 watts RMS (225 peaks) frequency response: 50-22,000 Hz Alpine KTA-30FW C marine amplifier 4-channel Class D amp designed for off-road use 75 watts RMS per channel (150 watts peak) speaker- and preamp-level inputs high- and low-pass crossovers (variable 50-400 Hz, 12 dB per octave) IP66 weather-resistance rating matte black finish warranty: 1 year What's in the PSS-SX01-PWR package:This package contains four individually boxed items along with parts in the main box:Main Box: 2 Front logo badges 2 Rear logo badges Installation instructions Warranty information Product Registration Alpine Technical Support information KTA-30FW Amplifier: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other end) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter SPV-65-SXS Speaker Pods (x2): 2 Speaker pods w/integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on the other end) KCX-BT100 Bluetooth Adapter: Bluetooth adapter w/ 3M adhesive backing and attached 12" wires + RCA cables (inline 2A mini-ATC fuse) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE PSS-SX01-PWR 4 6.5" Wakeboard Tower Speakers + Amplifier KTA-30FW+Bluetooth For ATV/UTV/RZR This 600-watt sound system combines the premium sound you've expected from Alpine and a unique design that will complement the look of your Side-by-Side or UTV. NEXT LEVEL SOUNDGet everything you need to take your side-by-side system to the next level with the PSS-SXS01-PWR Power Package Upgrade. This upgrade includes Alpine’s PSS-SX01 and SPV-65-SXS for the ultimate sound system upgrade. MUSIC ON YOUR ADVENTURESStream music directly from your smartphone without a radio or head unit source with the included Bluetooth® Adaptor. The module allows for quick and easy pairing to your smartphone so you can listen to your music during your drive. General Features: bundle includes a 4-channel amplifier, controller, and four 6-1/2" cage-mount speaker pods includes clamp-style bar mounts and water-resistant wiring harness fits in a variety of Polaris, Honda, Kawasaki, Can-Am, and Yamaha models marine-grade construction for weather resistance Bluetooth enabled with controller included Alpine SPV-65-SXS 6-1/2" speakers (4) grille-mounted 1" Teteron dome tweeters IP55 weather-resistance rating power handling: 90 watts RMS (225 peaks) frequency response: 50-22,000 Hz Alpine KTA-30FW C marine amplifier 4-channel Class D amp designed for off-road use 75 watts RMS per channel (150 watts peak) speaker- and preamp-level inputs high- and low-pass crossovers (variable 50-400 Hz, 12 dB per octave) IP66 weather-resistance rating matte black finish warranty: 1 year What's in the PSS-SX01-PWR package:This package contains four individually boxed items along with parts in the main box:Main Box: 2 Front logo badges 2 Rear logo badges Installation instructions Warranty information Product Registration Alpine Technical Support information KTA-30FW Amplifier: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other end) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter SPV-65-SXS Speaker Pods (x2): 2 Speaker pods w/integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on the other end) KCX-BT100 Bluetooth Adapter: Bluetooth adapter w/ 3M adhesive backing and attached 12" wires + RCA cables (inline 2A mini-ATC fuse) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

ALPINE PSS-SX01-PWR 4 6.5" Wakeboard Tower Speakers + Amplifier KTA-30FW+Bluetooth For ATV/UTV/RZR This 600-watt sound system combines the premium sound you've expected from Alpine and a unique design that will complement the look of your Side-by-Side or UTV. NEXT LEVEL SOUNDGet everything you need to take your side-by-side system to the next level with the PSS-SXS01-PWR Power Package Upgrade. This upgrade includes Alpine’s PSS-SX01 and SPV-65-SXS for the ultimate sound system upgrade. MUSIC ON YOUR ADVENTURESStream music directly from your smartphone without a radio or head unit source with the included Bluetooth® Adaptor. The module allows for quick and easy pairing to your smartphone so you can listen to your music during your drive. General Features: bundle includes a 4-channel amplifier, controller, and four 6-1/2" cage-mount speaker pods includes clamp-style bar mounts and water-resistant wiring harness fits in a variety of Polaris, Honda, Kawasaki, Can-Am, and Yamaha models marine-grade construction for weather resistance Bluetooth enabled with controller included Alpine SPV-65-SXS 6-1/2" speakers (4) grille-mounted 1" Teteron dome tweeters IP55 weather-resistance rating power handling: 90 watts RMS (225 peaks) frequency response: 50-22,000 Hz Alpine KTA-30FW C marine amplifier 4-channel Class D amp designed for off-road use 75 watts RMS per channel (150 watts peak) speaker- and preamp-level inputs high- and low-pass crossovers (variable 50-400 Hz, 12 dB per octave) IP66 weather-resistance rating matte black finish warranty: 1 year What's in the PSS-SX01-PWR package:This package contains four individually boxed items along with parts in the main box:Main Box: 2 Front logo badges 2 Rear logo badges Installation instructions Warranty information Product Registration Alpine Technical Support information KTA-30FW Amplifier: 4-Channel amplifier 14" Power/signal harness (26-pin connector on one end and bare wires + RCAs on the other end) 4 Self-tapping screws (Length 3/4") Connection sheet Limited Warranty sheet Thank you letter SPV-65-SXS Speaker Pods (x2): 2 Speaker pods w/integrated mounting clamps and rubber bushings Two 8" Water-proof speaker connectors (threaded connector on one end / bare wire on the other end) KCX-BT100 Bluetooth Adapter: Bluetooth adapter w/ 3M adhesive backing and attached 12" wires + RCA cables (inline 2A mini-ATC fuse) ⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.

Soundstream WTS-6W Pair (2) Water-Resistant Gloss White 6.5” Wake Tower Speakers WTS Wake Tower Speakers offer maximum performance in the open-air environment of any boat or off-road vehicle. Considering extreme outdoor conditions, WTS systems use the best materials to defend against the potentially damaging effects of water and UV sunlight and impact resistance. Each WTS enclosure is pre-wired for the optional LED rings and spotlight, making future add-ons simple. Additional options for WTS enclosures include bright white or RGB LED grill rings and a rear-mounted high-intensity LED spotlight. Immediately available WTS sets include 6.5” & 8” coaxial, in brilliant gloss white and black. Available now in time for the 2020 boat/UTV season, an additional 8” coaxial set will feature a high-efficiency horn-loaded compression tweeter and midrange driver.  Whatever your application, WTS speaker systems are guaranteed to carry your tunes across any lake, river, or desert. Enclosure Construction WTS enclosure construction begins with Centrex, a material made in the USA that offers incredible advantages to traditional polymer materials. Centrex is resilient to extreme temperatures, chemicals, & weathering while maintaining impervious structural density. WTS enclosures resist harmful sunlight from deteriorating their brilliant coloring thanks to a UV inhibitor blended with the raw Centrex material. Following the concept of superior materials, WTS mounting clamps are cast aluminum, with adjustment to 2.5” diameter, and can rotate 360 degrees. Included rubber inserts accommodate installation to most round or oval watercraft wake towers and off-road vehicle roll cages. All speakers, LED rings, and LED spotlight pre-wire pass through the mounting bracket center, keeping all wiring in a dry environment. Speaker Characteristics Coaxial speakers of WTS use waterproof materials, including blended polypropylene-mica cones, titanium dome tweeter, and rubber gaskets around the tweeter bridge. A neoprene gasket under the speaker frame prevents moisture from entering the enclosure, eliminating the possibility of electrical shorting. Color-matching grills made of Centrex and a stainless steel mesh over the tweeter prevent harmful damage by rogue debris. General Features: 6-1/2" 2-way marine tower speakers (pair) injection-molded polypropylene-mica composite cone durable rubber surround 1" titanium dome tweeter rugged Centrex basket and grille Stainless steel mounting brackets fit bars up to 2-1/2" handles up to 150 watts RMS (300 watts peak power) sensitivity: 89.3 dB dimensions: 7" x 9-1/2" Warranty: 2 years What's in the WTS-6W package: Warranty registration sheet 2 Wake tower speakers (white) attached mounting brackets 4 Rubber mount-gaskets 16 Crimp connectors (18 ga.) 5mm Allen key 2 Nylon carry-bags ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

Power Acoustik MCS-22B 3″ Handlebar Mounted Amplified System Wirelessly Connect Bluetooth Audio & USB Input – Black Finish. Savor your weekend as you cruise down the road on your motorcycle while listening to your favorite music without worrying about water, mud, dirt, and dust.Featuring an injection-molded UV-Treated Polypropylene cone and easy-to-use front-mounted controls for making quick adjustments to volume or track while at a red light or before you take off on your journey.Mounting the MCS-22B system to fit motorcycles easily with slide-in metal adaptors to fit the metric, the standard Bike bolts in with two screws, and no adaptor is needed! Installation is also quick and easy with a three-wire connection and single-run cable that easily tucks in and follows your motorcycle’s wiring with ease. General Features: Power Rating: 40W x 2 Watts (Ea) Built-in Bluetooth Audio Streaming Built-in FM Radio & USB Input (Supports 64GB) Ea Pod Dimensions 3″w x 3″h x 3.5″d 100% Water Resistant Enclosure & Speakers System High-Density Metal Construction w/ UV Coating Mounting Bracket Fits Most Handlebars NEW Swivel Mounting System Meets ROHS and CE Certifications Speaker Specs 4-Ohm Speaker Impedance 40w MAX Power Handling Frequency Response 40-20kHz System Efficiency 90dB (1w/1m) Ea Pod Dimensions 3″w x 3″h x 3.5″d Mounting Bracket Features Upper Mounting Bracket Lower Mounting Bracket 360 Degree Rotation Point Mounting Bracket Base Minimum 1.26″/32mm Size Bar Maximum 2.25″/57.15mm Size Bar   ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.

Power Acoustik MCS-22C 3″ Handlebar Mounted Amplified System – Wirelessly Connect Bluetooth Audio & USB Input – Chrome Finish. Savor your weekend as you cruise down the road on your motorcycle while listening to your favorite music without worrying about water, mud, dirt, and dust. You are featuring an injection-molded UV-Treated Polypropylene cone and easy-to-use front-mounted controls for making quick adjustments to volume or track while at a red light or before you take off on your journey. Mounting the MCS-22C system to fit motorcycles easily with slide-in metal adaptors to fit the metric, the standard Bike bolts in with two screws, and no adaptor is needed! Installation is also quick and easy with a three-wire connection and single-run cable that easily tucks in and follows your motorcycle’s wiring with ease. Sit back and ride, knowing that you have put your music in the engineering hands of Power Acoustik. (Sold in Pairs) General Features: Power Rating: 40W x 2 Watts (Ea) Built-in Bluetooth Audio Streaming Built-in FM Radio & USB Input (Supports 64GB) Ea Pod Dimensions 3″w x 3″h x 3.5″d 100% Water Resistant Enclosure & Speakers System High-Density Metal Construction w/ UV Coating Mounting Bracket Fits Most Handlebars NEW Swivel Mounting System Meets ROHS and CE Certifications Speaker Specs 4-Ohm Speaker Impedance 40w MAX Power Handling Frequency Response 40-20kHz System Efficiency 90dB (1w/1m) Ea Pod Dimensions 3″w x 3″h x 3.5″d Mounting Bracket Features Upper Mounting Bracket Lower Mounting Bracket 360 Degree Rotation Point Mounting Bracket Base Minimum 1.26″/32mm Size Bar Maximum 2.25″/57.15mm Size Bar ⚠️Warning:For cancer and Reproductive Harm, go to www.P65Warnings.ca.gov.