00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
2 Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box
$1,280.85
$1,400.00
2 Alpine R-SB12V Loaded 12" 750w R-W12D4 Subwoofers+Ported Sub Enclosure Box
Enclosure Stacking FeaturesUnique to Alpine, the subwoofer 10-inch and 12-inch enclosures are available in a single or “linked” format with an optional mounting bracket. This innovative design allows the sound consumer to add more bass to their system easily.The optional mounting bracket (sold separately) is available in a 10-inch KTX-H10 or 12-inch KTX-H12 solution that mounts to the face of the subwoofer and links for a sturdy, dual-subwoofer enclosure. The silver enclosure trim matches the steel bracketing and Halo display trim for a synergized look.Optimized PerformanceThe ported enclosure design delivers a higher total sound output for deep, powerful bass, reliable sound reproduction, and great sound quality. The 10-inch enclosure is tuned to 36 Hz, while the 12-inch enclosure is tuned to 35 Hz for optimized performance with Alpine’s S-and-R-Series subwoofers.General Features:
Includes R-W12D4 wired in parallel
750W RMS power handling
2 Ohm Impedance
Ported Enclosure Design
Frequency Response: 24-200Hz
Vent Tuning Frequency: 35Hz
Dimensions: 17" W x 14.625" H x 15" D
Authorized Dealer
1-year Warranty
What is in the box:
Ported enclosure loaded with one R-W12D4 subwoofer driver
Rubber flange protector (installed on the subwoofer)
Alpine KTX-H12 Linking KitWhen it comes to bass, two is always better than one. Alpine's KTX-H12 linking kit allows you to connect two Alpine S-SB12V or R-SB12V 12" subwoofer enclosures to double your bass. The kit includes heavy-duty steel front and rear linking brackets to securely connect the enclosures and all the hardware you'll need. The front bracket's silver finish is made to coordinate with the enclosures' design, while the silver Alpine badge adds a touch of style. Warranty: 1 year.What is in the KTX-H12 package:
KTX-H12 Installation instructions
Front port-link
Two 9" front port braces
23.25" Rear link-plate
Four 25mm hex-socket screws
Eight 14mm hex-socket screws
Four 20mm threaded alignment posts
3mm Allen-key
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Alpine SBT-S10V Truck Loaded 1000W Single 10" Ported Subwoofer Enclosure
$299.95
$320.00
Alpine SBT-S10V Truck Loaded SWT Enclosure 1000W Peak (350W RMS) Single 10" Loaded Ported Subwoofer Enclosure
With a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces. The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically. Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly. Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package. The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area. FEA Optimized for linearity and made with injection-molded Santoprene ®, the HAMR surround is a key part of the suspension system that provides accurate, distortion-free control at extreme excursions.
More Bass, Less SpaceWith a compact wedge-style design and shallow mount, the SBT-S10V (2-ohm system) is a perfect fit for truck applications, with a design that works in small spaces.Two-Way Alpine Logo FlexibilityThe Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.Significant Output in a Compact Package with 4 Unique Alpine Subwoofer TechnologiesRadial Vented VC Heat Sink & Airflow Management SystemActively manages voice coil temperatures by forcing air directly across the heat sink system.
FEA Optimized Dual-Sided Machined CRC Motor Structure
Creates a symmetrical magnetic field with evenly distributed flux density to reduce distortion while improving power handling and output significantly.
FEA Optimized Injection Molded TPE Spider with Pass-Through Gap Design
Provides the mechanical clearance needed for over 50mm of peak-to-peak excursion, unleashing massive output potential from a small package
Subwoofer Features:
10" SWT Series Single 2-ohm Shallow Mount Subwoofer
Peak Power Handling: 1000 watts
RMS Power Handling: 350 watts
Recommended Power Range: 100W - 350W
Poly-Mica Dust Cap & Pulp-Kevlar
Polyurethane Foam Surround, featuring H.A.M.R. Surround Technology
Spiral Cut Aluminum Former
65mm Voice Coil with High-Temp 4-Layer SVC Winding
Frequency Response: 28 - 200 Hz
Sensitivity: 84.8 dB
Authorized Dealer
1-year Manufacturer's Warranty
Enclosure Features:
Ported angled / wedge-style truck enclosure
3/8" medium-density fiberboard (MDF) construction
Automotive-grade dark grey carpet
8AWG Push Terminals
Protective mesh subwoofer grilled included
Dimensions: 7"D x 22"W x 16"H
What's in the SBT-S10V package:
Ported enclosure loaded with one 10" woofer
2 Mounting plates
Six 1/2" Self-tapping screws
Owner's manual (English/ French/ Spanish)
Installation notes
Warranty information
Online product registration information
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
ROCKFORD FOSGATE PS-8 8" COMPACT POWERED ENCLOSED SUBWOOFER SPEAKER AMPLIFIER
$349.99
$649.99
Rockford Fosgate PS-8 300 Watt 8" Punch Amplified Powered Loaded Sub EnclosureIf you need to quickly add bass to a system but don't have much space or height to make it happen? Then the PS-8 is a perfect candidate! The PS-8 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 150 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.It will absolutely show down extremely excellent HD HQ sound and brilliant impressive performances.You can enjoy all of the vibrant, colorful, and distinctive musical tones you've ever wanted for your own desires.
General Features:
Punch Single 8" Amplified Loaded Shallow Enclosure
Power Rating:
Peak: 300 watts
RMS: 150 watts
Integrated Class-D Amplifier
Remote bass level control included
Includes all power, ground, and turn-on wires
CEA-2006 Compliant Amplifier
CEA-2031 Compliant & Klippel Verified Driver
Cast aluminum with an ABS backplate enclosure
Includes mounting hardware
Supports Hi-level (Speaker) / low-level (RCA) inputs
Remote/DC Offset/Signal Sense turn on select
Short circuit, thermal, and reverse polarity protection
Quick disconnect power and signal connections
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Variable 12 dB/Octave Butterworth low pass crossover: 50 - 120 Hz
Built-in adjustable bass boost EQ: 0 - +12 dB @45 Hz
Selectable phase: 0°/180°
Frequency response: 25 - 150 Hz
Input sensitivity: 125mV - 9V
Fuse Rating: 30A x 1
Dimensions: 9.40"W x 14.4"D x 3.30"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the PS-8 Package:
Enclosure loaded with one 8" woofer and built-in amplifier
17' 12-gauge power wire with in-line fuse holder
18" 12-gauge ground wire
Removable power plug
15' Remote turn-on wire
12" Signal input harness
Remote Level Control
Metal mounting bracket
15' Remote cable
Two 3/8" Screws
Four 1" Screws
Installation and Operation manual
PS-8 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PS-8 300 Watt 8" Punch Amplified Powered Loaded Sub Enclosure
$349.99
$649.99
Rockford Fosgate PS-8 300 Watt 8" Punch Amplified Powered Loaded Sub EnclosureIf you need to quickly add bass to a system but don't have much space or height to make it happen? Then the PS-8 is a perfect candidate! The PS-8 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 150 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.It will absolutely show down extremely excellent HD HQ sound and brilliant impressive performances.You can enjoy all of the vibrant, colorful, and distinctive musical tones you've ever wanted for your own desires.
General Features:
Punch Single 8" Amplified Loaded Shallow Enclosure
Power Rating:
Peak: 300 watts
RMS: 150 watts
Integrated Class-D Amplifier
Remote bass level control included
Includes all power, ground, and turn-on wires
CEA-2006 Compliant Amplifier
CEA-2031 Compliant & Klippel Verified Driver
Cast aluminum with an ABS backplate enclosure
Includes mounting hardware
Supports Hi-level (Speaker) / low-level (RCA) inputs
Remote/DC Offset/Signal Sense turn on select
Short circuit, thermal, and reverse polarity protection
Quick disconnect power and signal connections
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Variable 12 dB/Octave Butterworth low pass crossover: 50 - 120 Hz
Built-in adjustable bass boost EQ: 0 - +12 dB @45 Hz
Selectable phase: 0°/180°
Frequency response: 25 - 150 Hz
Input sensitivity: 125mV - 9V
Fuse Rating: 30A x 1
Dimensions: 9.40"W x 14.4"D x 3.30"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the PS-8 Package:
Enclosure loaded with one 8" woofer and built-in amplifier
17' 12-gauge power wire with in-line fuse holder
18" 12-gauge ground wire
Removable power plug
15' Remote turn-on wire
12" Signal input harness
Remote Level Control
Metal mounting bracket
15' Remote cable
Two 3/8" Screws
Four 1" Screws
Installation and Operation manual
PS-8 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate PS-8 8" 150W RMS Powered Car Stereo Audio Underseat Subwoofer
$349.99
$700.00
Rockford Fosgate PS-8 300 Watt 8" Punch Amplified Powered Loaded Sub EnclosureIf you need to quickly add bass to a system but don't have much space or height to make it happen? Then the PS-8 is a perfect candidate! The PS-8 features a Punch 8” subwoofer in a custom sealed enclosure and is powered by a mighty 150 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.It will absolutely show down extremely excellent HD HQ sound and brilliant impressive performances.You can enjoy all of the vibrant, colorful, and distinctive musical tones you've ever wanted for your own desires.
General Features:
Punch Single 8" Amplified Loaded Shallow Enclosure
Power Rating:
Peak: 300 watts
RMS: 150 watts
Integrated Class-D Amplifier
Remote bass level control included
Includes all power, ground, and turn-on wires
CEA-2006 Compliant Amplifier
CEA-2031 Compliant & Klippel Verified Driver
Cast aluminum with an ABS backplate enclosure
Includes mounting hardware
Supports Hi-level (Speaker) / low-level (RCA) inputs
Remote/DC Offset/Signal Sense turn on select
Short circuit, thermal, and reverse polarity protection
Quick disconnect power and signal connections
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Variable 12 dB/Octave Butterworth low pass crossover: 50 - 120 Hz
Built-in adjustable bass boost EQ: 0 - +12 dB @45 Hz
Selectable phase: 0°/180°
Frequency response: 25 - 150 Hz
Input sensitivity: 125mV - 9V
Fuse Rating: 30A x 1
Dimensions: 9.40"W x 14.4"D x 3.30"H
Authorized Internet Dealer
1-year Manufacturer's Warranty
What's in the PS-8 Package:
Enclosure loaded with one 8" woofer and built-in amplifier
17' 12-gauge power wire with in-line fuse holder
18" 12-gauge ground wire
Removable power plug
15' Remote turn-on wire
12" Signal input harness
Remote Level Control
Metal mounting bracket
15' Remote cable
Two 3/8" Screws
Four 1" Screws
Installation and Operation manual
PS-8 owner's manual
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate P300-12 300W 12" Single Powered Bass Sub Sealed Enclosure Amp
$349.99
$499.99
Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included
The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or saving space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom-sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground, and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
12" Punch Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Proprietary woofer optimized by Rockford Fosgate for this enclosure
CEA-2031 Compliant
Klippel Verified
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Frequency response: 35-150 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Enclosure General Features:
Rockford Fosgate Sealed Enclosure
"Closed-loop" design ensures optimum performance between the woofer, amplifier, and enclosure
Universal vehicle fitment
5/8" MDF Box material
Covered with industrial heat-activated vinyl
Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H
Weight: 29.6 Lbs. (approx)
Amplifier General Features:
300 Watt Class-D monoblock
CEA-2006 Compliant
Remote bass level control included
Intelligent auto turn-on/off function
Gain and bass boost control
Built-in adjustable bass boost EQ
Built-in 0°/180° phase switch
Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
Removable Connector Power/Ground/Remote
Thermal and over-voltage protection
High-efficiency, low-current design
Low-Level & High-Level Inputs
Low-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
What is in the P300-12 package:
P300-12 owner's manual
Subwoofer enclosure loaded with one 12" woofer and built-in amplifier
Four 10 amp ATO fuses
Removable power plug
10" Signal input harness
3mm Allen wrench
Remote Punch Level Control
Metal mounting bracket (for Punch Level Control)
17.5' Punch Level Control cable (3.5mm plug on both ends)
Two 3/8" Punch Level Control mounting screws
Hook and Loop mounting straps
Installation and Operation Manual
Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P300-12 Single 12" subwoofer enclosure with 300-watt amp
$349.99
$399.99
Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included
The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or saving space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom-sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground, and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
12" Punch Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Proprietary woofer optimized by Rockford Fosgate for this enclosure
CEA-2031 Compliant
Klippel Verified
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for a larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue-resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Frequency response: 35-150 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Enclosure General Features:
Rockford Fosgate Sealed Enclosure
"Closed-loop" design ensures optimum performance between the woofer, amplifier, and enclosure
Universal vehicle fitment
5/8" MDF Box material
Covered with industrial heat-activated vinyl
Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H
Weight: 29.6 Lbs. (approx)
Amplifier General Features:
300 Watt Class-D monoblock
CEA-2006 Compliant
Remote bass level control included
Intelligent auto turn-on/off function
Gain and bass boost control
Built-in adjustable bass boost EQ
Built-in 0°/180° phase switch
Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
Removable Connector Power/Ground/Remote
Thermal and over-voltage protection
High-efficiency, low-current design
Low-Level & High-Level Inputs
Low-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
What is in the box:
Rockford Fosgate Punch P300-12 owner's manual
Subwoofer enclosure loaded with one 12" woofer and built-in amplifier
Four 10 amp ATO fuses (two installed in enclosure/ two spare)
Removable power plug
10" Signal input harness
3mm Allen wrench
Remote Punch Level Control
Metal mounting bracket (for Punch Level Control)
17.5' Punch Level Control cable (3.5mm plug on both ends)
Two 3/8" Punch Level Control mounting screws
Hook and Loop mounting straps
Installation and Operation Manual (English/ French/ Spanish/ German/ Italian)
⚠️Warning:This product can expose you to, known to the State of California to cause cancer. For more information, go to P65Warnings.ca.
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
New Rockford Fosgate P300-12 12" 300 Watt Single Powered Subwoofer Sub Enclosure
$349.99
$399.99
Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included
The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
12" Punch Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Proprietary woofer optimized by Rockford Fosgate for this enclosure
CEA-2031 Compliant
Klippel Verified
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Frequency response: 35-150 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Enclosure General Features:
Rockford Fosgate Sealed Enclosure
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Universal vehicle fitment
5/8" MDF Box material
Covered with industrial heat-activated vinyl
Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H
Weight: 29.6 Lbs. (approx)
Amplifier General Features:
300 Watt Class-D monoblock
CEA-2006 Compliant
Remote bass level control included
Intelligent auto turn on/off function
Gain and bass boost control
Built-in adjustable bass boost EQ
Built-in 0°/180° phase switch
Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
Removable Connector Power/Ground/Remote
Thermal and over-voltage protection
High-efficiency, low current design
Low-Level & High-Level Inputs
Low-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
What is in the box:
Rockford Fosgate Punch P300-12 owner's manual
Subwoofer enclosure loaded with one 12" woofer and built-in amplifier
Four 10 amp ATO fuses (two installed in enclosure/ two spare)
Removable power plug
10" Signal input harness
3mm Allen wrench
Remote Punch Level Control
Metal mounting bracket (for Punch Level Control)
17.5' Punch Level Control cable (3.5mm plug on both ends)
Two 3/8" Punch Level Control mounting screws
Hook and Loop mounting straps
Installation and Operation manual (English/ French/ Spanish/ German/ Italian)
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P300-12 Single 12" subwoofer enclosure with 300-watt amp + Blue Amp kit
$349.99
$399.99
Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + Blue Amp Kit
The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
12" Punch Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Proprietary woofer optimized by Rockford Fosgate for this enclosure
CEA-2031 Compliant
Klippel Verified
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Frequency response: 35-150 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Enclosure General Features:
Rockford Fosgate Sealed Enclosure
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Universal vehicle fitment
5/8" MDF Box material
Covered with industrial heat-activated vinyl
Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H
Weight: 29.6 Lbs. (approx)
Amplifier General Features:
300 Watt Class-D monoblock
CEA-2006 Compliant
Remote bass level control included
Intelligent auto turn on/off function
Gain and bass boost control
Built-in adjustable bass boost EQ
Built-in 0°/180° phase switch
Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
Removable Connector Power/Ground/Remote
Thermal and over-voltage protection
High-efficiency, low current design
Low-Level & High-Level Inputs
Low-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
What is in the box:
Rockford Fosgate Punch P300-12 owner's manual
Subwoofer enclosure loaded with one 12" woofer and built-in amplifier
Four 10 amp ATO fuses (two installed in enclosure/ two spare)
Removable power plug
10" Signal input harness
3mm Allen wrench
Remote Punch Level Control
Metal mounting bracket (for Punch Level Control)
17.5' Punch Level Control cable (3.5mm plug on both ends)
Two 3/8" Punch Level Control mounting screws
Hook and Loop mounting straps
Installation and Operation manual (English/ French/ Spanish/ German/ Italian)
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P300-12 Single 12" subwoofer enclosure with 300-watt amp + 4 Gauge Blue Amp kit
$369.99
$399.99
Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + 4 Gauge Amp Kit
The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
12" Punch Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Proprietary woofer optimized by Rockford Fosgate for this enclosure
CEA-2031 Compliant
Klippel Verified
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Frequency response: 35-150 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Enclosure General Features:
Rockford Fosgate Sealed Enclosure
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Universal vehicle fitment
5/8" MDF Box material
Covered with industrial heat-activated vinyl
Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H
Weight: 29.6 Lbs. (approx)
Amplifier General Features:
300 Watt Class-D monoblock
CEA-2006 Compliant
Remote bass level control included
Intelligent auto turn on/off function
Gain and bass boost control
Built-in adjustable bass boost EQ
Built-in 0°/180° phase switch
Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
Removable Connector Power/Ground/Remote
Thermal and over-voltage protection
High-efficiency, low current design
Low-Level & High-Level Inputs
Low-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
What is in the box:
Rockford Fosgate Punch P300-12 owner's manual
Subwoofer enclosure loaded with one 12" woofer and built-in amplifier
Four 10 amp ATO fuses (two installed in enclosure/ two spare)
Removable power plug
10" Signal input harness
3mm Allen wrench
Remote Punch Level Control
Metal mounting bracket (for Punch Level Control)
17.5' Punch Level Control cable (3.5mm plug on both ends)
Two 3/8" Punch Level Control mounting screws
Hook and Loop mounting straps
Installation and Operation manual (English/ French/ Spanish/ German/ Italian)
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate Punch P300-12 Single 12" subwoofer enclosure with 300-watt amp + 4 Gauge Red Amp kit
$349.99
$399.99
Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included + Red Amp Kit
The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
12" Punch Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Proprietary woofer optimized by Rockford Fosgate for this enclosure
CEA-2031 Compliant
Klippel Verified
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Frequency response: 35-150 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Enclosure General Features:
Rockford Fosgate Sealed Enclosure
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Universal vehicle fitment
5/8" MDF Box material
Covered with industrial heat-activated vinyl
Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H
Weight: 29.6 Lbs. (approx)
Amplifier General Features:
300 Watt Class-D monoblock
CEA-2006 Compliant
Remote bass level control included
Intelligent auto turn on/off function
Gain and bass boost control
Built-in adjustable bass boost EQ
Built-in 0°/180° phase switch
Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
Removable Connector Power/Ground/Remote
Thermal and over-voltage protection
High-efficiency, low current design
Low-Level & High-Level Inputs
Low-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
What is in the box:
Rockford Fosgate Punch P300-12 owner's manual
Subwoofer enclosure loaded with one 12" woofer and built-in amplifier
Four 10 amp ATO fuses (two installed in enclosure/ two spare)
Removable power plug
10" Signal input harness
3mm Allen wrench
Remote Punch Level Control
Metal mounting bracket (for Punch Level Control)
17.5' Punch Level Control cable (3.5mm plug on both ends)
Two 3/8" Punch Level Control mounting screws
Hook and Loop mounting straps
Installation and Operation manual (English/ French/ Spanish/ German/ Italian)
⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Rockford Fosgate P300-12 300W 12" Single Powered Bass Sub Enclosure Amp
$349.99
$399.99
Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included
The P300-12 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 12” subwoofer in a sealed enclosure powered by an internal 300-watt amplifier. If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-12 is the right one for the job! The P300-12 features a Punch 12” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.
General Features:
12" Punch Series Subwoofer
Power Handling:
Peak: 600 watts
RMS: 300 watts
Proprietary woofer optimized by Rockford Fosgate for this enclosure
CEA-2031 Compliant
Klippel Verified
Proprietary spider venting/cooling technique
StampCast basket with integrated spider venting
High modulus Kevlar re-inforced paper-pulp cone
Semi-flexible, PVC removable protective motor cover
Multi-point high-temp/high-strength neck joint bonding technique
Tall-profile VAST Santoprene surround for larger surface area
Dual tear & fatigue resistant poly-cotton spider with woven tinsel leads
Fatigue resistant and reduced strain "stitched on" flexible lead wire design
Proprietary all-metal, radially oriented compression input terminal assembly
Optimized motor magnetics with extended pole and bumped vented backplate
High temp 2" voice coil w/ spun-laced Nomex insulating reinforcement collar
Frequency response: 35-150 Hz
Authorized Internet Dealer
1-year Manufacturer's Warranty
Enclosure General Features:
Rockford Fosgate Sealed Enclosure
"Closed-loop" design ensures optimum performance between woofer, amplifier, and enclosure
Universal vehicle fitment
5/8" MDF Box material
Covered with industrial heat-activated vinyl
Dimensions: 7"TD x 11"BD x 19-9/16"W x 15"H
Weight: 29.6 Lbs. (approx)
Amplifier General Features:
300 Watt Class-D monoblock
CEA-2006 Compliant
Remote bass level control included
Intelligent auto turn on/off function
Gain and bass boost control
Built-in adjustable bass boost EQ
Built-in 0°/180° phase switch
Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
Removable Connector Power/Ground/Remote
Thermal and over-voltage protection
High-efficiency, low current design
Low-Level & High-Level Inputs
Low-Level: 1 RCA Pair
High-Level: Left/Right Summed Inputs
What is in the box:
Rockford Fosgate Punch P300-12 owner's manual
Subwoofer enclosure loaded with one 12" woofer and built-in amplifier
Four 10 amp ATO fuses (two installed in enclosure/ two spare)
Removable power plug
10" Signal input harness
3mm Allen wrench
Remote Punch Level Control
Metal mounting bracket (for Punch Level Control)
17.5' Punch Level Control cable (3.5mm plug on both ends)
Two 3/8" Punch Level Control mounting screws
Hook and Loop mounting straps
Installation and Operation manual (English/ French/ Spanish/ German/ Italian)
⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca