6.5" Component Car Speakers (90)

Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to take the leap to premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the very best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile, so they can fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to make the 6-1/2" woofer really strong in the lower frequencies. The woofer cone itself uses a specialized fiber for extreme rigidity while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in the face of extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll really have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws Eight 5/8" Screws 8 Speed-clips 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

2 Pair Alpine S2-S65C 480W Peak (160W RMS) 6.5" S-Series 2-way Component Speaker System Newly redesigned and Hi-Res Audio Certified, the Next-Generation S-Series S2-S65C 6.5” Component Speakers offer a new standard in entry-level sound performance. Using “trickle-down” technology, inspired design, and performance cues from the Ultra-High-Resolution AlpineF#1Status system, the Next-Generation Alpine S-Series Speakers are now Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This new benchmark in sound quality elevates the Next-Gen S-Series Speakers resulting in a more accurate and natural sound at an entry-level price point. Crafted with a unique combination of Poly Propylene, Glass Fiber, and Mica Cone materials, the S2-S65 is designed for lightweight construction, high output, and low distortion, giving you a clean and accurate audio experience. General Features: 6-1/2" 2-way Component System Car Speakers Peak Power Handling: 480 watts per set / 240 watts on each side RMS Power Handling: 160 watts per set / 80 watts on each side Polypropylene cone material Rubber speaker surround High Amplitude Multi-Roll surround technology HI-RES Certified 1" Silk Dome Tweeters Ferrite magnet motor structure Top-mount Depth: 2-5/16" Cutout Dimensions: 5-1/8" Impedance: 4 ohms Frequency Response: 55 - 40000 Hz Sensitivity: 88 dB Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the SAlpine S2-S65C package: 2 Woofers 2 Woofer mount adapter brackets 2 Tweeters 2 Flush mount housings 2 Tweeter grilles Two 37" Tweeter wires with in-line crossovers 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-3/16" Screws Warranty information Alpine S2-S65C owner's manual Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca. 

Alpine Type-R SPR-60C 6.5" 2-Way Type-R Series Component Car Audio Speaker System Alpine uses powerful neodymium magnets which are much smaller than traditional magnets, so the SPR-60C's high-density polymer frames will fit into more places than most 6-1/2" woofers. External 2-way crossover networks control the high and low frequencies for seamless, clear sound — and they're 60% smaller than the old Type-R crossovers so they're easier to install. Type-R speakers have earned their reputation in the past as the masters of "crank it to the max," but Alpine has really kicked the performance factor of the latest models up a notch or two. General Features: Type-R 6-1/2" 2-way Component System Peak Power Handling: 660 watts per set / 330 watts each side RMS Power Handling: 220 watts per set / 110 watts each side Recommended power range: 5 - 125 watts RMS per channel Impedance: 4 ohms New style grille offers full woofer protection along with a unique new design Multi-Layer hybrid fiber cone delivers a really strong bass response High Amplitude Multi-Roll (HAMR) Santoprene rubber surround provides consistent, extended cone movement Hybrid layered-pulp woofer with rubber surround 1" Textile ring-dome tweeter External crossovers -12 dB/octave (high -pass) and 6 dB/octave (low-pass) crossover points Frequency response: 65 Hz - 29,000 Hz Sensitivity: 88 dB Top-mount depth: 2-3/8" Authorized Internet Dealer 1-year Manufacturer's Warranty What's in the box: Alpine SPR-60C owner's manual 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler 6-3/4G size) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 29" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached 32" input and 12" output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Self-tapping screws Eight M4x12mm Machine screws Eight 1/2" Screws 8 Speed-clips Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Important Notice sheet Template and specs on box ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov

Alpine X-S65C 720W Max (240W RMS) 6.5" X-Series 2-Way Component Car Speakers If you've been an Alpine devotee from car to car, their X-Series speakers are your opportunity to leap at the premium sound. Designed with a laser focus on superior imaging, this X-S65C 6-1/2" component speaker system will bring out the best in your audio system. And an all-new magnet design in a cast aluminum frame allows these speakers to have a low profile to fit in a wide array of vehicles. All about the build Alpine uses a powerful magnet and a super-efficient motor structure to strengthen the 6-1/2" woofer in lower frequencies. The woofer cone uses a specialized fiber for extreme rigidity, while Alpine's proprietary High Amplitude Multi-Roll surround ensures durability in extreme temperatures. Serious power handling The separate 1" carbon graphite dome tweeter handles the high frequencies with satisfying accuracy, and its extended frequency response lends a sense of realism and atmosphere unmatched by lesser tweeters. Driven by an aftermarket amplifier, you'll have a soaring system, thanks to power handling up to a whopping 120 watts RMS. General Features: 6.5 X-Type 2-Way Component System Power Handling: Max: 720 W per set/ 360 W per side RMS: 240 W per set/ 120 W per side Recommended power range: 10 - 120W RMS Hi-Res Audio compatible Nano-fiber woofer cone H.A.M.R. surround 1" carbon graphite tweeter Adjustable tweeter attenuation: 0dB, +3dB, -3dB Adjustable tweeter phase: Normal or reverse A-Pole type neodymium magnet Top-mount depth: 2-5/16" Cutout Dimensions: 5-13/32" 4 ohms impedance Frequency Response: 55 - 50,000 Hz Sensitivity: 89 dB Authorized Internet Dealer What is in the X-S65C package: 2 Woofers + 2 Woofer grilles 2 Grille badges 2 Tweeters (each has a 26" length of wire attached) 2 Tweeter grilles (installed) 2 Surface mount housings (with tweeters installed) Two tweeter crossovers (each has attached 32" input and 14" output wires) 2 Rectangular adhesive-backed pads (crossover) 2 Circular adhesive-backed discs (tweeter) Eight 1-1/8" Screws + Eight 5/8" Screws 8 Speed-clips + 4 Speed nuts Four 5" Zip ties Warranty information Important Notice Online product registration information Templates and specs on the box X-S65C owner's manual ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

ALPINE SPV-65X-WRA 225W Max (75W RMS) 6-1/2" 2-Way Component Speaker System for Select Jeep Wrangler Vehicles Optimized for your Jeep Alpine digs Jeeps. In their endeavor to optimize the audio experience for fellow Jeep fans, Alpine has designed the weatherproof and extremely versatile SPV-65X-WRA 6-1/2" speaker system that allows you to configure the included woofers and tweeters separately or as coaxial, depending on where you need to install them. Included factory wiring harnesses will also make the installation go smoother. As components, Alpine gives you several options for mounting the component 1" Teteron dome tweeters, including brackets to use your JK's tombstone-style locations if you have them. Inline crossovers make installation tidier as well. As coaxial If you have rear locations that don't make a component configuration feasible, use Alpine's included brackets to mount the tweeters onto the woofers in a coaxial design. General Features: 6-1/2" 2-Way Component System Compatible with 2007 - 2018 Jeep Wrangler and Jeep Wrangler Unlimited Front or Rear Soundbar Installation IP55 Weather Resistant Power Handling: Peak: 450 watts per set / 225 watts each side RMS: 150 watts per set / 75 watts each side Recommended Power Range: 10 - 75 watts RMS per channel 6-1/2" Cone 1" Teteron Dome Tweeters CEA-2031 compliant speakers Top-mount Depth: 2-5/8" Cutout Dimensions: 5-7/16" 4 ohms impedance Frequency Response: 70- 22,000 Hz Sensitivity: 88dB Authorized Internet Dealer What's in the box: Alpine SPV-65X-WRA owner's manual 2 Woofers 2 Tweeters (with 5" wire attached) 2 Tweeter crossovers (in-line) 2 Polyfill sheets 2 Tweeter mounting plates 2 Bridge mount brackets 2 Bridge mount wire covers 2 Foam strips (0.25" x 0.625") 2 Alpine logo badges Warranty information Online product registration information Important Notice sheet Installation instructions Specifications on box ⚠️Warning:This product can expose you to, known to the State of California, to cause cancer. For more information, go to P65Warnings.ca.

2 Pair Alpine R-S65C.2 100W RMS 6.5" R-Series Component 2-Way Speakers TURN IT UP If you play your music loud and want others to know, the R-Series speakers match you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, delivering power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers. General Features: 6.5-inch R-Series Component 2-way Car Speakers the component speaker system includes two woofers, 2 tweeters, and 2 external crossovers Power Handling: Peak: 300 watts RMS: 100 watts 4 Ohms impedance Frequency response: 65Hz-40kHz Carbon Fiber Reinforced Polymer (CFRP) exclusive cone technology CFRP increases the speakers’ mid-bass performance and dynamic range CFRP is used as a tweeter diaphragm, enabling the system to perform up into the 45kHz range, making the speakers compliant with High-Resolution Audio playback Patented High-Amplitude Multi-Roll (HAMR) surround for control and accuracy Ideal for tight installations and use matching speaker grills that are shallower as well (sold separately) Uses an in-line, passive design with a reduced footprint, which also contributes to easier installation Authorized Dealer 1-year Manufacturer's Warranty What's in the box: 2 Woofers Two 6-1/2" Adapter rings (includes GM/Chrysler) Two 6x8 Adapter rings 2 Woofer grilles 2 Grille badges 2 Tweeters (each has an attached 30" length of wire) 2 Tweeter grilles (installed) 2 Swivel flush mount housings (with tweeters installed) Two crossovers (each has attached input and output wires) 2 Flush mount retention rings 2 Stealth brackets 2 Foam self-adhesive pads 2 Foam self-adhesive rings Eight 1-1/8" Screws Eight 1/2" Screws 8 Speed-clips Eight M4x12mm Machine screws Four 5" Zip ties 2 Pieces of two-sided tape Warranty information Online product registration note Important Notice sheet Template and specs on the box Alpine R-S65C.2 owner's manual ⚠️Warning:Cancer and Reproductive Harm-www.P65Warnings.ca.gov